Blitzfire Portable Monitors Tip Choices
CLICK HERE TO RETURN TO BLITZFIRE PACKAGES

MD14A

MAX-FLOW 500 GPM FIXED GALLONAGE - (2000 l/min)
The fixed orifice tip is ideal for high rise attack when pressure fluctuations can be extreme. The nozzle will operate with pressures as low as 30 psi (2bar). The pattern adjusts from straight stream to a 120 degree wide fog. Further rotation opens the nozzle to flush 3/8" (10mm) debris without shutting down. Hardcoat anodized aluminum with rubber bumper. Standard inlet is 2.5"NH (65mm) rocker lug swivel.


MD18A

MAX-MATIC 100 PSI AUTOMATIC TIP 2.5" NH (65mm)
Automatic pressure control with a flow capacity of 100-500 gpm (400-2000 l/min). The nozzle operates at a standard 100 psi (7bar). The pattern adjusts from straight stream to a 120 degree wide fog. Further rotation opens the nozzle to flush 3/8" (10mm) debris without shutting down. Hardcoat anodized aluminum with rubber bumper. Standard inlet is 2.5" NH (65mm) rocker lug swivel.



MD17A

MAX-MATIC 80 PSI - LOW PRESSURE VERSION
Same as MD18A above, but operates at a low pressure of approximately 80 psi (6bar).
   

MD12A

MAX-FORCE DUAL PRESSURE AUTOMATIC TIP 2.5" NH (65mm)
with a flow capacity of 100-500 gpm (400-2000 l/min). The nozzle may be switched between standard 100 psi (7bar) and a low pressure mode 55 psi (4bar) by twisting a knob on the front of the nozzle. The pattern adjusts from straight stream to a 120 degree wide fog. Further rotation opens the tip to flush 3/8" (10mm) debris without shutting down. Hardcoat anodized aluminum with rubber bumper. Standard inlet is 2.5"NH (65mm) rocker lug swivel.

 

  
CLICK HERE TO RETURN TO BLITZFIRE PACKAGES